Rule 1500 G.P.H. Bilge Pump

Description

Rule 1500 G.P.H. Bilge Pump

• Fully Submersible
• Easy clean snap lock strainer
• Silent and vibrationless operation
• Anti-airlock protetion
• Compact, efficient long life motor
• Ignition protected
• No burn-out when run dry
• Rust and corrosion protection
• Used by leading boatbuilders worldwide
• Marine grade blocked wiring

Rule 1500 G.P.H. Bilge Pump MX7000CR. Adjustable Angle holders MX7000CR (1-1/2″ ID) are our strongest and most versatile holders. The three point mounting distributes the stress and provides side support. This heavy duty unit allows you to set your outrigger angle for maximum efficiency. The angle is set by positioning the clamp on the main tube during installation. The main tube of this unit is designed to accept the outrigger in either end so the holder can be mounted above or below any flat surface. A fast pin can be substituted for the bolt connecting the clamp to the wing for bridge laydown capability. Approximate area required for mounting is 14-1/2″ x 18″.. Recomended poles for MX7000CR. Ao8716CR – 16 ft Center Rigger (Mk II). Ao8718CR – 18 ft Center Rigger (Mk II). MX8712CR – 12 ft MX Step- Tube Style. MX8715CR – 15 ft MX Step- Tube Style. MX8718CR – 18 ft MX Step- Tube Style. MX8716CX – 16 ft MX Step- Tube Style – Single Spreader. MX8720CX – 20 ft MX Step- Tube Style – Double Spreader.

– Fully Submersible
– Easy clean snap lock strainer
– Silent and vibrationless operation
– Anti-airlock protetion
– Compact, efficient long life motor
– Ignition protected.
– No burn-out when run dry
– Rust and corrosion protection
– Used by leading boatbuilders worldwide
– Marine grade blocked wiring.
– Power – Max Continuous (Amps): 4.8 amp
– Volts: 12v
– Product Dimensions: 6.0″H x 4.3″W x 4.3″D.
– Gallons Per Hour: 1500
– Operation: Non-Automatic
– Outlet Size: 1 1/8″.
– Box Dimensions: 5″H x 6″W x 6″L
– Weight: 3.1lbs.
– Brand: Rule
– Model Number: 1135-31491
Shipping Details:
– A genuine Rule product, don’t settle for anything less
– More pumping capacity and more exclusive design features than any comparable competitive pump at a lower cost
– 1-1/8 inch 28. 6 millimeter hose barb discharge outlet, 12 Volts DC, limited 3 year
– Silent and vibrationless operation. Stainless steel shaft, completely submersible, rust and corrosion protection
– Compact, efficient, long-life motors, able to run dry for short periods

• Power – Max Continuous (Amps): 4.8 amp
• Volts: 12v
• Product Dimensions: 6.0″H x 4.3″W x 4.3″D.
• Gallons Per Hour: 1500
• Operation: Non-Automatic
• Outlet Size: 1 1/8″.
• Box Dimensions: 5″H x 6″W x 6″L
• Weight: 3.1lbs.
• Brand: Rule
• Model Number: 1135-31491
• Features: tweezers
• Manufacturer Part Number: 31491
• Model: 02
• Assembled Product Weight: 3.1 lb
• Manufacturer: Xylem Flow Control
• Contained Battery Type: 1
• Color: Multicolor
• Material: Plastic
• Assembled Product Dimensions (L x W x H): 6.00 x 6.00 x 5.00 Inches

Additional information